Overswing in golf: when the backswing is too long

A long backswing is not a fault. John Daly made a career of one. An overswing is something else: the club keeps travelling after the turn that should carry it has finished.

In short

An overswing is a backswing that keeps going after the shoulders have stopped turning. The extra length comes from a folding lead arm, collapsing wrists or hips that turn too far. It has to be undone on the way down, which makes contact inconsistent.

Film it
Face-on or down the line
Aim for
Lead arm at 160 degrees or straighter, shoulders about 90 degrees

How to tell them apart

In a long swing the shoulders have turned a long way and the arm is still long. In an overswing the shoulders stopped at 70 or 80 degrees and the extra length comes from somewhere else.

There are three usual sources: the lead arm folds at the elbow, the wrists break down so the club drops, or the hips keep turning because the trail leg has straightened.

Why it costs you

Everything that folded or collapsed on the way back has to be put right again on the way down, in a quarter of a second. Some days the timing is there. Most days you hit a mix of fat shots and blocks.

How to check it

Pause at the top and look at two numbers: shoulder turn and the angle of the lead elbow. A shoulder turn under 80 degrees with an elbow under 150 is an overswing. OneFix Golf reports both, and the hip turn as well.

How to shorten it

  1. Tuck a towel under your trail armpit.
  2. Swing back with the lead arm pushing away from your chest.
  3. Stop when the arm starts to fold. That is your top.
  4. Two sets of twelve swings.

It will feel like half a swing. Film it. It will look like a normal backswing, and you will not lose the distance you expect to lose.

Related guides

More on swing faults

Updated 16 November 2026. See how the app measures and the glossary.